VSI-5X sand making machine has become the core product in sand making industry, which introducing Germany technology, owning a number of patents and independent intellectual property rights and integrating three types of sand making machines.
The main features of VSI-5X sand making machine as follows:
1. After improved design, rotor with deep chamber increases 30% capacity of materials throughput.
2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.
3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate.
4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.
5. Rhombus shape impact plate is used to prevent side plate from being damaged.
6. Bearing is famous international brand imported from Japan, Sweden, etc.
7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.
8. Spread dish with double purposes can make two feeding ways change easily.
9. Special seal structure under main shaft guarantee no oil leak without seal.
10. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy.
11. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.
Application of VSI-5X sand making machine
VSI-5X sand making machine is widely applied in many industries, such as cement making, refractory making,glass raw materials making, sand making, and metallurgical industry, etc. It is suitable for ores and rocks in different hardness. VSI-5X sand making machine is highly recommended to crush high hardness materials as iron ore,nonferrous metals, corundum, and bauxite, quartz sand, and basalt, etc.
Working Principle of VSI-5X sand making machine
Materials fall into the hopper and then through the feed opening at center enter the high speed rotor which will throw out the materials with high speed. Firstly, materials strike those materials that are free falling down. Then, materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity and then fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. Lastly, crushed materials will be charged from the discharging opening.
The materials fall into the hopper and circle-hole, and then they will be divided into two parts by the distributing plate. One part of materials cross the distributing plate and enter the high speed impeller,and then materials are accelerated and thrown out. The other part falls down from the sides of distributor. Materials firstly strike the free falling down materials. Then, materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity and then fall down. The falling materials with materials shot from the impeller form a continuous curtain of materials. At last, crushed materials will be discharged from the discharging opening.
Technical Data of VSI-5X sand making machine
|Model||Feed at center&sides||Feed at center||Soft Material||Hard Material||REV (r/min)||Power (kw)||Motor Model||Machine Size (mm)|
|Capacity (t/h)||Max.Feeding (mm)|
VSI-5X sand making machine price:
If you want to know the VSI-5X sand making machine price or have any questions about VSI-5X sand making machine, please do not hesitate to contact us.